Fujitsu D1837 Teknik Kılavuz - Sayfa 28

Anakart Fujitsu D1837 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D1837 48 sayfaları. Siemens

Add-on modules / Upgrading

Exit energy-saving mode, switch off the system and remove the power plug from the

mains outlet, before carrying out any of the procedures described in this chapter!

Even when you have run down the device, parts of the device (e.g. memory modules, PCI

extension boards) are still energised.

Technical data

●

Intel Pentium 4 with 533 or 800 MHz front side bus in the LGA775 design.

●

A current list of the processors supported by this mainboard is available on the Internet at:

www.fujitsu-siemens.com/mainboards.

Never touch the underside of the processor. Even minor soiling such as grease from the

skin can impair the processor's operation or destroy the processor.

Place the processor in the socket with extreme care, as the spring contacts of the socket

are very delicate and must not be bent.

►

Remove the heat sink.

►

Press down the lever (1) and unhook it.

►

Fold up the frame.

►

Remove the old processor (2) from the socket.

A26361-D1837-Z120-1-7419, Edition 1

English - 19