Fujitsu D1837 Teknik Kılavuz - Sayfa 27
Anakart Fujitsu D1837 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D1837 48 sayfaları. Siemens
Sayfayı Yazdır
Jumper settings
The positions of the jumpers are shown on page "Cover".
Setting via control-panel plug connector
A
B
C
i
Please pay attention on the exact position of the pin pairs!
Skipping system and BIOS Setup password - pinpair A
Pinpair A enables skipping the system and BIOS Setup password.
Inserted
System and BIOS Setup password are skipped when the device is switched on and
may be changed.
not inserted
System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - pinpair B
Pinpair B enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
Inserted
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
Diskette" restores the System BIOS on the mainboard.
not inserted
Normal operation (default setting).
18 - English
Pin pair A inserted =
Skipping system and BIOS Setup password
1
2
Pin pair B inserted =
System BIOS recovery
1
Pin pair C inserted =
2
factory setting
1
2
A26361-D1837-Z120-1-7419, Edition 1