Fujitsu D2530 Technisches Handbuch - Seite 21
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Hauptplatine Fujitsu D2530 herunter. Fujitsu D2530 35 Seiten. For econel 200 s2
Seite drucken
Features
7 = CPU2 fan
8 = RAID key
9 = SATA 1 - 6
10 = USB 7/8
11 = IDE primary
12 = HDLED
13 = intrusion
14 = front panel
Settings with jumpers
The system board is supplied with all jumpers set on default position (pin 1-2).
KBPWR (1)
1-2
PS/2 keyboard/mouse powered by 5V (default)
2-3
PS/2 keyboard/mouse powered by 5V Standby
USBPW 1/2 (2) and USBPW 3/4 (15)
1-2
USB device powered by 5V (default)
2-3
USB device powered by 5V Standby
BIOSREC (19)
1-2
system BIOS (default)
2-3
recover system BIOS (Flash BIOS, Recovery Diskette required)
VGA_EN (22)
1-2
onboard VGA enabled (default)
2-3
onboard VGA disabled (PCI VGA graphics controller)
CLRTC (23)
1-2
CMOS/RTC settings are not cleared (default)
2-3
clear CMOS/RTC settings
D2530 (Econel 200 S2)
21 = LPT1
22 = VGA_EN (jumper)
23 = CLRTC (jumper)
24 = LAN_EN (jumper)
25 = LAN_BW (jumper)
26 = rear fan
27 = external connectors
A = 5V Standby LED
Technical Manual
Connectors and jumpers
21