Fujitsu D2530 Panduan Teknis - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D2530. Fujitsu D2530 35 halaman. For econel 200 s2

Halaman Cetak

Features

7 = CPU2 fan

8 = RAID key

9 = SATA 1 - 6

10 = USB 7/8

11 = IDE primary

12 = HDLED

13 = intrusion

14 = front panel

Settings with jumpers

The system board is supplied with all jumpers set on default position (pin 1-2).

KBPWR (1)

1-2

PS/2 keyboard/mouse powered by 5V (default)

2-3

PS/2 keyboard/mouse powered by 5V Standby

USBPW 1/2 (2) and USBPW 3/4 (15)

1-2

USB device powered by 5V (default)

2-3

USB device powered by 5V Standby

BIOSREC (19)

1-2

system BIOS (default)

2-3

recover system BIOS (Flash BIOS, Recovery Diskette required)

VGA_EN (22)

1-2

onboard VGA enabled (default)

2-3

onboard VGA disabled (PCI VGA graphics controller)

CLRTC (23)

1-2

CMOS/RTC settings are not cleared (default)

2-3

clear CMOS/RTC settings

D2530 (Econel 200 S2)

21 = LPT1

22 = VGA_EN (jumper)

23 = CLRTC (jumper)

24 = LAN_EN (jumper)

25 = LAN_BW (jumper)

26 = rear fan

27 = external connectors

A = 5V Standby LED

Technical Manual

Connectors and jumpers