Fujitsu D2799 Technisches Handbuch - Seite 34
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Hauptplatine Fujitsu D2799 herunter. Fujitsu D2799 38 Seiten. For primergy tx200 s6
Seite drucken
Connectors and indicators
The LAN controller also supports WOL functionality by means of Magic
Packet™. It is also possible to start a system via a LAN without a separate boot
hard disk drive. PXE is supported here.
The separate management LAN connector is used as a management interface
(iRMC S2) and is prepared for operation with the Remote Management.
Optionally the shared LAN connector (LAN2) can also be used for iRMC S2
server management.
Each LAN connector has two LEDs which display the speed of the connection
and its status:
Figure 8: LAN LEDs
No Indicator
1
LAN link/transfer
(management
LAN)
2
LAN speed
(management
LAN)
3
LAN link/transfer
(shared LAN)
4
LAN speed
(shared LAN)
34
Description
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady green signal in the event of a LAN transfer
rate of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady yellow signal in the event of a LAN transfer
rate of 1 Gbit/s
Steady green signal in the event of a LAN transfer
rate of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Technical Manual
D2799 (TX200 S6)