Fujitsu FLASH-CAN2-100P-M06 Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Fujitsu FLASH-CAN2-100P-M06 herunter. Fujitsu FLASH-CAN2-100P-M06 20 Seiten. F²mc-16lx family

Seite drucken

7.4 UART (X4)

One 9-pin D-Sub female connectors are used

for the serial interface (UART).

TXD is the transmit output, RXD is the receive input.

The DTR signal can be used to generate a reset.

Please use 1:1 cable for PC-connection.

7.5 CAN Interface (X2, X3)

Two 9-pin D-Sub male connector

are used for the CAN interface.

Adjust both potentiometers (P1, P2) clockwise

to their end position.

(Check that Pin 8 of U4 and Pin 8 of U5 are grounded.)

UG-900001-32

Change even page title here

Chapter 7 Connectors

Connector X4:

Connector X2, X3:

- 16 -

GND DTR RxD TxD

CTS RTS DSR

GND

CANH

CANL