Fujitsu MB9B500 Series Benutzerhandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Fujitsu MB9B500 Series herunter. Fujitsu MB9B500 Series 34 Seiten. Fss mb9bf506r ev-board
Seite drucken
Usage
1) Open Nand Flash sample project, and start debug.
2) Use "step over" to debug, and watch local variable "sec", "min", "hour".
4.4 CAN
Hardware Setting
Connect 2 EV-board with CAN interface, as following figure.
Block Diagram
Node A: use buffer 10 (ID = 0x12345678) to transfer and buffer 8 (ID = 0x08765432)
to receive
Node B: use buffer 7 (ID = 0x12345678) to receive and buffer 10 (ID = 0x08765432)
to transfer.
Usage
1) Define "CAN_TX_RX" in the code, and compile, then program the code into Node A
2) Don't define "CAN_TX_RX" in the code, and compile, then program the code into
Node B.
3) Connect Node A with Node B
When in real usage, user can program one node, and use the other node to debug.
CAN 1
EV board 1
(Node A)
CAN 2
Figure 4-6: CAN Hardware Connection
Node A
Buffer 10
(ID=0x12345678)
Buffer 8
(ID=0x08765432)
Figure 4-7: CAN Demo Block Diagram
17
CAN 1
EV board 2
(Node B)
CAN 2
Node B
Buffer 7
(ID=0x12345678)
Buffer 10
(ID=0x08765432)