Fujitsu MB9B500 Series Manual do utilizador - Página 17
Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe Fujitsu MB9B500 Series. Fujitsu MB9B500 Series 34 páginas. Fss mb9bf506r ev-board
Imprimir página
Usage
1) Open Nand Flash sample project, and start debug.
2) Use "step over" to debug, and watch local variable "sec", "min", "hour".
4.4 CAN
Hardware Setting
Connect 2 EV-board with CAN interface, as following figure.
Block Diagram
Node A: use buffer 10 (ID = 0x12345678) to transfer and buffer 8 (ID = 0x08765432)
to receive
Node B: use buffer 7 (ID = 0x12345678) to receive and buffer 10 (ID = 0x08765432)
to transfer.
Usage
1) Define "CAN_TX_RX" in the code, and compile, then program the code into Node A
2) Don't define "CAN_TX_RX" in the code, and compile, then program the code into
Node B.
3) Connect Node A with Node B
When in real usage, user can program one node, and use the other node to debug.
CAN 1
EV board 1
(Node A)
CAN 2
Figure 4-6: CAN Hardware Connection
Node A
Buffer 10
(ID=0x12345678)
Buffer 8
(ID=0x08765432)
Figure 4-7: CAN Demo Block Diagram
17
CAN 1
EV board 2
(Node B)
CAN 2
Node B
Buffer 7
(ID=0x12345678)
Buffer 10
(ID=0x08765432)