Fujitsu PRIMERGY TX100 S1 Technisches Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Hauptplatine Fujitsu PRIMERGY TX100 S1 herunter. Fujitsu PRIMERGY TX100 S1 32 Seiten. For tx100 s1
Auch für Fujitsu PRIMERGY TX100 S1: Spezifikationen (13 seiten), Handbuch für Service-Ergänzungen (46 seiten), Optionen Handbuch (46 seiten)
Seite drucken
Notes on safety
V
CAUTION!
●
Components can become very hot during operation. Ensure you do
not touch components when making extensions to the system board.
There is a danger of burns!
●
Transmission lines to peripheral devices must be adequately
shielded.
To the LAN wiring the requirements apply in accordance with the
●
standards EN 50173 and EN 50174-1/2. As minimum requirement
the use of a protected LAN line of category 5 for 10/100 Mbit/s
Ethernet, and/or of category 5e for Gigabit Ethernet is considered.
The requirements of the specification ISO/IEC 11801 are to be
considered.
Never connect or disconnect data transmission lines during a storm
●
(risk of lightning hazard).
Batteries
V
CAUTION!
●
Incorrect replacement of lithium battery may lead to a risk of
explosion. The batteries may only be replaced with identical batteries
or with a type recommended by the manufacturer.
It is essential to observe the instructions in the
lithium
battery".
8
Technical Manual
Important notes
chapter "Replacing the
D2679-B11 (TX100 S1)