Fujitsu PRIMERGY TX100 S1 Manuel technique - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Fujitsu PRIMERGY TX100 S1. Fujitsu PRIMERGY TX100 S1 32 pages. For tx100 s1
Également pour Fujitsu PRIMERGY TX100 S1 : Spécifications (13 pages), Manuel de supplément de service (46 pages), Manuel des options (46 pages)
Imprimer la page
Notes on safety
V
CAUTION!
●
Components can become very hot during operation. Ensure you do
not touch components when making extensions to the system board.
There is a danger of burns!
●
Transmission lines to peripheral devices must be adequately
shielded.
To the LAN wiring the requirements apply in accordance with the
●
standards EN 50173 and EN 50174-1/2. As minimum requirement
the use of a protected LAN line of category 5 for 10/100 Mbit/s
Ethernet, and/or of category 5e for Gigabit Ethernet is considered.
The requirements of the specification ISO/IEC 11801 are to be
considered.
Never connect or disconnect data transmission lines during a storm
●
(risk of lightning hazard).
Batteries
V
CAUTION!
●
Incorrect replacement of lithium battery may lead to a risk of
explosion. The batteries may only be replaced with identical batteries
or with a type recommended by the manufacturer.
It is essential to observe the instructions in the
lithium
battery".
8
Technical Manual
Important notes
chapter "Replacing the
D2679-B11 (TX100 S1)