Fujitsu Siemens D1160 Zusätzliches technisches Handbuch - Seite 20
Blättern Sie online oder laden Sie pdf Zusätzliches technisches Handbuch für Hauptplatine Fujitsu Siemens D1160 herunter. Fujitsu Siemens D1160 24 Seiten.
Seite drucken
Mechanics
USB power jumper function
description
Pin
1
2
3
Jumper 2-3
Jumper 1-2
BIOS options
Please refer to BIOS description on the including CD-ROM (menu Advanced System Management ).
Messages
The Message LED (frontpanel connector) shows two different states:
•
A slow blinking (once a second) of the LED signals that any application has received a
message. (ACPI- mode)
•
A fast blinking (five times a second) of the LED signals a hardware problem.
The fast blinking LED can have several different causes:
−
a necessary sensor is missing or defect
−
an available sensor has overtemperature
−
a fan is defect or not working properly
−
a software is responsible for blinking
More detailed information are shown with an additional System Monitoring Software or on
i
the monitor after reboot entering BIOS Setup (menu Advanced System Management ).
BIOS: Please refer to BIOS description on the including CD-ROM.
12
Default setting:
If the power supply supports auxiliary voltage the USB interface is
permanently powered except when the main supply is plugged off.
Wakeup from ACPI S1-S4 state possible.
The USB interface is only powered in operating state.
Wakeup from ACPI S1 state possible.
Signal
VCC
USB power connection
VCC_AUX
1
A26361-D1160-Z180-5-7619