Fujitsu Siemens D1160 Panduan Teknis Tambahan - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Teknis Tambahan untuk Motherboard Fujitsu Siemens D1160. Fujitsu Siemens D1160 24 halaman.

Mechanics

USB power jumper function

description

Jumper 2-3

Jumper 1-2

Please refer to BIOS description on the including CD-ROM (menu Advanced System Management ).

The Message LED (frontpanel connector) shows two different states:

•

A slow blinking (once a second) of the LED signals that any application has received a

message. (ACPI- mode)

•

A fast blinking (five times a second) of the LED signals a hardware problem.

The fast blinking LED can have several different causes:

−

a necessary sensor is missing or defect

−

an available sensor has overtemperature

−

a fan is defect or not working properly

−

a software is responsible for blinking

More detailed information are shown with an additional System Monitoring Software or on

the monitor after reboot entering BIOS Setup (menu Advanced System Management ).

BIOS: Please refer to BIOS description on the including CD-ROM.

Default setting:

If the power supply supports auxiliary voltage the USB interface is

permanently powered except when the main supply is plugged off.

Wakeup from ACPI S1-S4 state possible.

The USB interface is only powered in operating state.

Wakeup from ACPI S1 state possible.

Signal

VCC

USB power connection

VCC_AUX

A26361-D1160-Z180-5-7619