Fujitsu SK-96320-80PMC Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Fujitsu SK-96320-80PMC herunter. Fujitsu SK-96320-80PMC 34 Seiten.
Auch für Fujitsu SK-96320-80PMC: Benutzerhandbuch (34 seiten), Benutzerhandbuch (34 seiten)

Seite drucken

3.3 Analog Power Supply Voltage (JP: 11, 13, 15)

The power supply as well as the positive reference voltage for the A/D-converter can be

provided internally or externally.

JP11, JP15 connects analog power supply voltages (AVcc and AVss)

JP13

JP11 (AVcc)

JP13 (AVRH)

JP15 (AVss)

Default: JP11, JP13 and JP15 are closed

By default, the A/D-converter supply and reference voltage is same as the microcontroller

supply voltage.

Note:

If JP11 and JP15 are open, the user has to supply an adequate analog voltage supply (AVcc

and AVss) to the A/D-converter.

If JP13 is open, the resistors R11 and R23 define AVRH.

By default the resistors R11 and R23 are not mounted on the board.

FMEMCU-UG-960010-12

Downloaded from

Elcodis.com

electronic components distributor

connects the analog reference voltage AVRH to AVcc

Jumper

Setting

Closed

Open

Closed

Open

Closed

Open

By default the resistors R11 and R23 are not mounted on the board

SK-96320-80PMC User Guide

Chapter 3 Jumpers and Switches

Description

AVcc is connected to Vcc

AVcc is disconnected from Vcc

AVRH is connected to AVcc

AVRH defined by resistor network

AVss is connected to GND

AVss is disconnected from GND

- 14 -