Fujitsu SK-96320-80PMC 사용자 설명서 - 페이지 14

{카테고리_이름} Fujitsu SK-96320-80PMC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SK-96320-80PMC 34 페이지.
Fujitsu SK-96320-80PMC에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (34 페이지)

페이지 인쇄

3.3 Analog Power Supply Voltage (JP: 11, 13, 15)

The power supply as well as the positive reference voltage for the A/D-converter can be

provided internally or externally.

JP11, JP15 connects analog power supply voltages (AVcc and AVss)

JP13

JP11 (AVcc)

JP13 (AVRH)

JP15 (AVss)

Default: JP11, JP13 and JP15 are closed

By default, the A/D-converter supply and reference voltage is same as the microcontroller

supply voltage.

Note:

If JP11 and JP15 are open, the user has to supply an adequate analog voltage supply (AVcc

and AVss) to the A/D-converter.

If JP13 is open, the resistors R11 and R23 define AVRH.

By default the resistors R11 and R23 are not mounted on the board.

FMEMCU-UG-960010-12

Downloaded from

Elcodis.com

electronic components distributor

connects the analog reference voltage AVRH to AVcc

Jumper

Setting

Closed

Open

Closed

Open

Closed

Open

By default the resistors R11 and R23 are not mounted on the board

SK-96320-80PMC User Guide

Chapter 3 Jumpers and Switches

Description

AVcc is connected to Vcc

AVcc is disconnected from Vcc

AVRH is connected to AVcc

AVRH defined by resistor network

AVss is connected to GND

AVss is disconnected from GND

- 14 -