Fujitsu SK-96390-100PMC Benutzerhandbuch - Seite 27
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Fujitsu SK-96390-100PMC herunter. Fujitsu SK-96390-100PMC 32 Seiten. Mb96300 series
![Fujitsu SK-96390-100PMC Benutzerhandbuch](/uploads/products/server2/2466100/2466100.png)
4) After programming the Flash-device, switch off the power supply and set back the
mode according to the usage of the application, e.g.:
DIP-Switch S2
(RUN Mode)
5) Power on the board. The user application is started directly.
4.2 Synchronous Mode
In order to program the Flash-ROM synchronously special third-party soft- and hardware has
to be used, e.g. GALEP-4 from www.conitec.de. This tool is not available for free.
A dedicated Flash programming socket (X17) is provided on the evaluation-board for direct
connection to this programmer.
X17: Flash programming socket
© Fujitsu Microelectronics Europe GmbH
SK-96390-100PMC User Guide
Chapter 4 Programming the internal Flash memory
MD0 MD1 MD2 nc
1
2
Figure 4-1: Flash Programming Socket
- 27 -
ON
OFF
3
4
n/c 1
2 P10_3
MD0 3
4 n/c
RST 5
6 SIN2
SOT2 7
8 SCK2
VCC 9
10 GND
UG-960017-11