Indesit DFC 2B+16 UK Tägliches Referenzhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Tägliches Referenzhandbuch für Geschirrspüler Indesit DFC 2B+16 UK herunter. Indesit DFC 2B+16 UK 8 Seiten.
Seite drucken
LOADING THE RACKS
UPPER RACK
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high position to place bulky
crockery in the lower basket and low position
to make the most of the tip-up supports by
creating more space upwards and avoid collision
with the items loaded into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers A at the sides of the rack and move
the basket downwards.
We strongly recommend that you do not adjust the height of the rack
when it is loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or unfold to
optimize the arrangement of crockery inside
the rack.
Wine glasses can be placed safely in the folda-
ble flaps by inserting the stem of each glass into
the corresponding slots.
Depending on the model:
- to unfold the flaps there is needed to slide it
up and rotate or release it from the snaps and
pull it down.
- to fold the flaps there is needed to rotate it
and slide flaps down or pull it up and attach
flaps to the snaps.
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical po-
sition when arranging plates or in a horizontal position (lower) to load
pans and salad bowls easily.
(loading example for the lower rack)
CUTLERY BASKET
It is fitted with top grids for improved cutlery arrangement. The cutlery
basket should be positioned only at the front of the lower rack.
Knives and other utensils with sharp edges must be placed in the cu-
tlery basket with the points facing downwards or they must be po-
sitioned horizontally in the tip-up compartments on the upper rack.
EN
5