Indesit DFC 2B+16 UK 일일 참조 매뉴얼 - 페이지 5

{카테고리_이름} Indesit DFC 2B+16 UK에 대한 일일 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit DFC 2B+16 UK 8 페이지.

페이지 인쇄

LOADING THE RACKS

UPPER RACK

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place bulky

crockery in the lower basket and low position

to make the most of the tip-up supports by

creating more space upwards and avoid collision

with the items loaded into lower rack.

The upper rack is equipped with a Upper Rack

height adjuster (see figure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position. To restore to the lower position, press

the levers A at the sides of the rack and move

the basket downwards.

We strongly recommend that you do not adjust the height of the rack

when it is loaded.

NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be fold or unfold to

optimize the arrangement of crockery inside

the rack.

Wine glasses can be placed safely in the folda-

ble flaps by inserting the stem of each glass into

the corresponding slots.

Depending on the model:

- to unfold the flaps there is needed to slide it

up and rotate or release it from the snaps and

pull it down.

- to fold the flaps there is needed to rotate it

and slide flaps down or pull it up and attach

flaps to the snaps.

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should

ideally be placed at the sides to avoid interferences with the spray arm.

The lower rack has tip-up supports which can be used in a vertical po-

sition when arranging plates or in a horizontal position (lower) to load

pans and salad bowls easily.

(loading example for the lower rack)

CUTLERY BASKET

It is fitted with top grids for improved cutlery arrangement. The cutlery

basket should be positioned only at the front of the lower rack.

Knives and other utensils with sharp edges must be placed in the cu-

tlery basket with the points facing downwards or they must be po-

sitioned horizontally in the tip-up compartments on the upper rack.