Indesit HOTPOINT LUCE DX1032CX Service-Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Service-Handbuch für Backofen Indesit HOTPOINT LUCE DX1032CX herunter. Indesit HOTPOINT LUCE DX1032CX 39 Seiten. Built-in touch control electronic multifunction 60 cm double oven

Indesit HOTPOINT LUCE DX1032CX Service-Handbuch
Indesit
Company
Setting the Minute Minder
The minute minder may be set regardless of whether the oven is switched on or off. It does not
switch the oven on or off.
When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30
seconds or when any active button on the control panel is pressed.
To set the minute minder proceed as follows:
1. Press button
.
2. Set the desired time using buttons + and -.
3. Once you have reached the desired value, press the
The lit
symbol will remind you that the minute minder is on.
To cancel the minute minder, press the
00:00. Press button
The
icon will switch off to indicate that the minute minder has been disabled.
Starting the Oven
1. Switch the control panel on by pressing the
times (ascending) and all buttons light up in sequence.
2. Select the TOP OVEN/ GRILL or MAIN OVEN by pressing the
OVEN
icon
3. Press the button corresponding to the desired cooking mode. The TEMPERATURE display
shows:
- the temperature associated with the mode, if programming manually;
- 'Auto', if programming is automatic.
The TIME display shows:
- the current time, if programming manually;
- the duration, if programming is automatic.
4. Press the
button to begin cooking.
5. The oven will begin its preheating phase, the preheating indicators will light up as the
temperature rises.
6. When the preheating process has finished, a buzzer sounds and all the preheating indicator
lights show that this stage has been completed: the food can then be placed in the oven.
7. During cooking it is always possible to:
- change the temperature by pressing the
modes only);
- set the duration of a cooking mode (see Cooking Modes);
- press the
button to stop cooking. In this case the appliance stores the temperature
modified previously in its memory (manual modes only);
- switch off the oven by pressing the
8. If a power cut occurs while the oven is already in operation, an automatic system within the
appliance will reactivate the cooking mode from the point at which it was interrupted, provided
that the temperature has not dropped below a certain level.
Programmed cooking modes which have not yet started will not be restored and must be
reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30
a power cut occurs. When the power supply is restored, the mode will have to be
reprogrammed).
Service Manual UK
button and use the + and – buttons to set the time to
again.
button for 3 seconds.
button again.
button. The appliance buzzer sounds three
button, followed by the + and - buttons (manual
14 of 39
TOP OVEN/GRILL or MAIN
English