AEG SANTO 75428 DT Benutzerhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gefrierschrank AEG SANTO 75428 DT herunter. AEG SANTO 75428 DT 46 Seiten.

AEG SANTO 75428 DT Benutzerhandbuch
Malfunction
Unusual noises.
The compressor does not start
immediately after changing
the temperature setting.
Water on the floor or on
storage shelves.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
1.
To switch off the appliance, Unplug
the mains plug.
2.
If it becomes necessary to replace the
lamp, prize out the lamp cover as
shown in the figure.
3.
Change the defective light bulb with
one of the some power (the
maximum power is shown on the
light diffuser).
4.
Refit the light bulb cover.
5.
Put the appliance back into
operation.
22
Possible Cause
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Water drain hole is blocked.
Remedy
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend
the component out of the
way.
The compressor starts after a
period of time.
See the "Cleaning and Care"
section.