AEG LAVATHERM 57810 User Information - Seite 15

Blättern Sie online oder laden Sie pdf User Information für Trockner AEG LAVATHERM 57810 herunter. AEG LAVATHERM 57810 32 Seiten. Condensation dryer
Auch für AEG LAVATHERM 57810: User Information (32 seiten)

Seite drucken

Putting in extra items or taking items out before end of

programme

1. Open loading door

Warning! Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the START/PAUSE (START/PAUZE) button to continue the drying

cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, the END (EINDE) and CREASE GUARD

(ANTI-KREUK) displays light up. If the AUDIBLE SIGNAL (ZOEMER) but-

ton has been pressed, an audible signal sounds intermittently.

The drying cycle is automatically followed by a crease guard phase

which lasts around 30 minutes. The drum rotates in intervals during

this phase. The laundry thereby remains relaxed and free of creases. The

laundry can be removed at any time during the crease guard phase.

(The laundry should be taken out towards the end of the crease guard

phase at the latest to prevent creases from forming.)

1. Open loading door

2. Before removing the laundry, remove lint from the micro-fine filer. It is

best to use a damp hand for this purpose (refer to "Cleaning and main-

tenance" section).

3. Remove laundry.

4. Turn the programme selector to OFF (UIT).

Important! After each drying cycle

– clean the micro-fine filter and fine strainer,

– drain the condensate tank

(refer to the "Cleaning and maintenance" section).

5. Close loading door.