AEG LAVATHERM 57810 사용자 정보 - 페이지 15

{카테고리_이름} AEG LAVATHERM 57810에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 57810 32 페이지. Condensation dryer
AEG LAVATHERM 57810에 대해서도 마찬가지입니다: 사용자 정보 (32 페이지)

페이지 인쇄

Putting in extra items or taking items out before end of

programme

1. Open loading door

Warning! Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the START/PAUSE (START/PAUZE) button to continue the drying

cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, the END (EINDE) and CREASE GUARD

(ANTI-KREUK) displays light up. If the AUDIBLE SIGNAL (ZOEMER) but-

ton has been pressed, an audible signal sounds intermittently.

The drying cycle is automatically followed by a crease guard phase

which lasts around 30 minutes. The drum rotates in intervals during

this phase. The laundry thereby remains relaxed and free of creases. The

laundry can be removed at any time during the crease guard phase.

(The laundry should be taken out towards the end of the crease guard

phase at the latest to prevent creases from forming.)

1. Open loading door

2. Before removing the laundry, remove lint from the micro-fine filer. It is

best to use a damp hand for this purpose (refer to "Cleaning and main-

tenance" section).

3. Remove laundry.

4. Turn the programme selector to OFF (UIT).

Important! After each drying cycle

– clean the micro-fine filter and fine strainer,

– drain the condensate tank

(refer to the "Cleaning and maintenance" section).

5. Close loading door.