Kohler K-1109 Installationshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationshandbuch für Badewannen Kohler K-1109 herunter. Kohler K-1109 32 Seiten. Bath whirlpool
Auch für Kohler K-1109: Handbuch für Hausbesitzer (36 seiten), Installationshandbuch (36 seiten)

Seite drucken

3. Secure the Whirlpool to the Subfloor

CAUTION: Risk of product damage. Do not lift the whirlpool by the piping or pump, or use the piping or

pump for structural support of the whirlpool.

- Choose the installation option that best applies to your particular installation. Follow the appropriate

instructions.

- If the subfloor is not level, shim the whirlpool support blocks as necessary.

Option for Using a Cement or Mortar Bed

- Spread a 2" (5cm) thick layer of cement or mortar on the subfloor where the whirlpool will be set. This will help

secure, level, and support the unit. Clear all the material away from the pump support bracket and support block

locations.

NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an

acceptable, durable bond.

NOTE: The pump support bracket and support blocks must rest directly on the subfloor.

- Position a piece of plastic drop cloth material on top of the cement or mortar bed. With help, carefully lift the

whirlpool into place, and make sure the pump support bracket and support blocks do not rest in the bed material.

- Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.

Option for Using Construction Adhesive

- Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks. With help,

carefully lift the whirlpool into position.

- Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.

Option for Using Silicone Sealant

- With help, carefully lift the whirlpool into position.

- Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.

- Apply a continuous bead of high-quality silicone sealant around the entire rim of the whirlpool.

1010997-2-

Spread a 2"

(5cm) layer of

cement or mortar

bed material

Clear spaces

for support

blocks

Apply a bead of

silicone sealant

around the entire

rim

Apply construction

adhesive to the

support blocks

Kohler Co.