Kohler K-1109 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Badewannen Kohler K-1109 herunter. Kohler K-1109 32 Seiten. Bath whirlpool
Auch für Kohler K-1109: Handbuch für Hausbesitzer (36 seiten), Installationshandbuch (36 seiten)

Seite drucken

1. Prepare the Site

NOTICE: Unless otherwise specified, floor support under the whirlpool must provide for a minimum of 80

lbs./square foot (390 Kg./square meter) loading.

NOTICE: Do not support the whirlpool by the rim.

- Make sure the flooring offers adequate support for your whirlpool, and verify that the subfloor is flat and level.

- The whirlpool should be installed in a drop-in installation. Construct 2x4 or 2x6 stud framing designed for your

particular installation. Frame the floor, or construct a frame for a raised installation in accordance with the

roughing-in information packed with the whirlpool.

- Position the plumbing according to the roughing-in information packed. Cap the supplies, and check for leaks.

2. Prepare the Whirlpool

- Install the drain to the whirlpool according to the drain manufacturer's instructions. Do not connect the trap at

this time.

- Position a clean drop cloth or similar material in the bottom of the whirlpool. Be careful not to scratch the surface

of the product.

Kohler Co.

Frame the floor

Position

according to the

the rough

roughing-in

plumbing

information

Verify that the subfloor

offers adequate support

and is flat and level

1010997-2-