Kohler K-1109 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler K-1109에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1109 32 페이지. Bath whirlpool
Kohler K-1109에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (36 페이지), 설치 매뉴얼 (36 페이지)

페이지 인쇄

1. Prepare the Site

NOTICE: Unless otherwise specified, floor support under the whirlpool must provide for a minimum of 80

lbs./square foot (390 Kg./square meter) loading.

NOTICE: Do not support the whirlpool by the rim.

- Make sure the flooring offers adequate support for your whirlpool, and verify that the subfloor is flat and level.

- The whirlpool should be installed in a drop-in installation. Construct 2x4 or 2x6 stud framing designed for your

particular installation. Frame the floor, or construct a frame for a raised installation in accordance with the

roughing-in information packed with the whirlpool.

- Position the plumbing according to the roughing-in information packed. Cap the supplies, and check for leaks.

2. Prepare the Whirlpool

- Install the drain to the whirlpool according to the drain manufacturer's instructions. Do not connect the trap at

this time.

- Position a clean drop cloth or similar material in the bottom of the whirlpool. Be careful not to scratch the surface

of the product.

Kohler Co.

Frame the floor

Position

according to the

the rough

roughing-in

plumbing

information

Verify that the subfloor

offers adequate support

and is flat and level

1010997-2-