Aqua Invent AH-18 Duplex Installation und Inbetriebnahme - Seite 4
Blättern Sie online oder laden Sie pdf Installation und Inbetriebnahme für Wasserspender Aqua Invent AH-18 Duplex herunter. Aqua Invent AH-18 Duplex 8 Seiten. Twin-tank water softener
Seite drucken
8. Make all electrical connections according to codes. Plug the valve transformer
into an approved power source (wall socket).
9. Tank one has a control valve (filter valve) and tank two has an adapter.
10. Look on the right side of the control valve, it has indicators showing which
position the control valve is in during "Regeneration" and which tank is in
"Service".
The figure below shows the valve in "Service" position with tank one
-
supplying conditioned water and tank two in standby.
SE timer function 9100
3.0 SE Timer
Valve in service: Dot on
Program mode: Dot on
Extra / Manual
l
regeneration button
In normal operation, the "Time of day" display alternates with "volume remaining" and
tank "In service". As treated water is used, the "Volume remaining" display counts down
in litres from a preset value to zero (-----). Once this occurs a "Regeneration" cycle
initiates immediately.
Water flow through the unit is shown by flashing of the "Flow dot indicator".
Aqua Invent AB – AH-18 Duplex – 2019-10
This shows the proceeding through the
regenerations steps during regeneration
of a tank
This shows which tank that is
in "Service"
Set up button
Water flow: Flashing dot
Set down
button