DFA SqwidNET Visio Tamper Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssensoren DFA SqwidNET Visio Tamper herunter. DFA SqwidNET Visio Tamper 13 Seiten. Manhole tampering solution

Seite drucken

5. Device Installation

Steel Type

Step 1: Prepare the surfaces

Instructions:

1. Use a lint-free cloth and solvent to clean the area of the

manhole cover where the device will be installed.

2. Use a lint-free cloth and solvent to clean the back of the Visio

Tamper device.

3. Allow solvent to dry (approx. 30 seconds).

4. Use a brush to thinly apply the tape primer to the area of the

manhole cover where the device will be installed.

5. Use a brush to thinly apply the tape primer to the back of the

Visio Tamper device.

6. Allow the primer to dry completely (3 to 5 min).

Fig. 5.1

Fig. 5.2