DFA SqwidNET Visio Tamper Kurulum Kılavuzu - Sayfa 10

Güvenlik Sensörleri DFA SqwidNET Visio Tamper için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DFA SqwidNET Visio Tamper 13 sayfaları. Manhole tampering solution

Sayfayı Yazdır

5. Device Installation

Steel Type

Step 1: Prepare the surfaces

Instructions:

1. Use a lint-free cloth and solvent to clean the area of the

manhole cover where the device will be installed.

2. Use a lint-free cloth and solvent to clean the back of the Visio

Tamper device.

3. Allow solvent to dry (approx. 30 seconds).

4. Use a brush to thinly apply the tape primer to the area of the

manhole cover where the device will be installed.

5. Use a brush to thinly apply the tape primer to the back of the

Visio Tamper device.

6. Allow the primer to dry completely (3 to 5 min).

Fig. 5.1

Fig. 5.2