DFA SqwidNET Visio Tamper Kurulum Kılavuzu - Sayfa 11

Güvenlik Sensörleri DFA SqwidNET Visio Tamper için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DFA SqwidNET Visio Tamper 13 sayfaları. Manhole tampering solution

Sayfayı Yazdır
Fig. 5.3
Fig. 5.4
Step 2: Securing the device
Instructions:
1. Cut two strips of double-sided tape, 90mm in length.
2. Apply the tape to the back of the enclosure as shown in Fig.
5.5 below.
3. Peel off the protective backing of the tape, taking care not to
touch the adhesive part.
4. Apply recommended epoxy to centre area of the device,
taking care not to cover the tape
5. Place the device on the manhole cover in the position shown
in Fig. 5.7 below.
6. Place firm pressure on the device for approx. 20 seconds to
ensure correct adhesion of the tape.
9