DFA SqwidNET Visio Tamper Installationshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssensoren DFA SqwidNET Visio Tamper herunter. DFA SqwidNET Visio Tamper 13 Seiten. Manhole tampering solution

Seite drucken

Fig. 3.1

Fig. 3.4

3. Device Preparation

Step 1: Open the device

Instructions:

1. Unscrew the two back screws using a star (Phillips)

screwdriver.

2.Remove the back cover from the end where the

screws are located and gently lift it up. If necessary, use a

screwdriver to carefully pry open the enclosure once the

screws have been removed.

Fig. 3.2

Step 2: Plug in the power connector

Instructions:

1. Take care to maintain the original orientation of the back

cover to the enclosure.

2. Plug the 2-pin power plug into the board connector. The

green LED on the board will ﬂash temporarily once power has

been successfully connected.

Fig. 3.5

Fig. 3.3