Avocet AV-100 Betriebshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Empfänger Avocet AV-100 herunter. Avocet AV-100 18 Seiten. Television audio receiver

AVOCET

Jumper Settings

Composite Bypass

Only one jumper is located on the circuit board. This

jumper is used for production testing and field calibration.

The proper positioning for this jumpers is as follows:

Jumper JU1 is used during production testing or

calibration to disconnect the tuning circuit from the

remainder of the audio circuitry. This is done in order to

inject test signals into the audio circuitry. Normally, the

user would not move this jumper, but in special cases,

this jumper can be used when a composite input is

needed in the AV-100. Contact the factory for

additional support on this application.

JU1 - Composite Bypass

1-2 Normal operation *

3-4 Factory Use only

*=as shipped from factory

AV-100