Avocet AV-100 운영 매뉴얼 - 페이지 15

{카테고리_이름} Avocet AV-100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avocet AV-100 18 페이지. Television audio receiver

AVOCET

Jumper Settings

Composite Bypass

Only one jumper is located on the circuit board. This

jumper is used for production testing and field calibration.

The proper positioning for this jumpers is as follows:

Jumper JU1 is used during production testing or

calibration to disconnect the tuning circuit from the

remainder of the audio circuitry. This is done in order to

inject test signals into the audio circuitry. Normally, the

user would not move this jumper, but in special cases,

this jumper can be used when a composite input is

needed in the AV-100. Contact the factory for

additional support on this application.

JU1 - Composite Bypass

1-2 Normal operation *

3-4 Factory Use only

*=as shipped from factory

AV-100