AvonSynth AVS-RING-1 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Modulator AvonSynth AVS-RING-1 herunter. AvonSynth AVS-RING-1 3 Seiten. Dual ring modulator

Seite drucken

The

User Guide

Thank you for purchasing from AvonSynth

Congratulations on your purchase of a brand new AvonSynth

AVS-RING-1 Dual Ring Modulator Eurorack Module. We trust that

it will both serve and inspire you as you create beautiful music

with it for years to come.

In order to get the most out of your module, please ensure that you read

this User Guide in its entirety so that you fully understand all of its

functionality, and that you follow all necessary safety directions during use.

Included in the Box

1 x Dual Ring Mod Module

Installation

Step 1: Power your system oﬀ. Place the module in your Eurorack-

compatible rack in any convenient position. Aﬃx the module to your

rails using the included mounting screws and nylon washers. Neglecting

to use these washers may result in unnecessary marking of the unit.

Step 2: Triple check the polarity of the power connector before

connecting the power cord to your power supply. Ensure that the -12v

line marked on the back of the module connects to the same end of

the ﬂat-cable that also connects to the -12v line on your power supply.

While AvonSynth modules use shrouded connectors that make this

process safer and more reliable, some systems do not conform to this

polarity standard, so careful checking is always necessary. Connecting

the module with incorrect polarity can result in irreversable damage

done to the module which cannot be covered by warranty.

Step 3: Power up your system and start patching!

www.AvonSynth.com

1 x 10 pin to 16 pin

ﬂat-cable power cord

AVS-RING-1

Dual Ring

Modulator

4 x M3 Mounting Screws

4 x Nylon Washers

Page 1 of 3