AvonSynth AVS-RING-1 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Modulator AvonSynth AVS-RING-1 herunter. AvonSynth AVS-RING-1 3 Seiten. Dual ring modulator

Seite drucken
The
User Guide
Features & Specifications
Two fully analogue Ring Modulators with radically different architectures and sounds
12 HP wide (60.6mm), 30mm deep, current consumption: +12V 30ma, -12V 30ma
'Discrete' original-style Ring Mod, with real transformers and diode ring
'Integrated' modern analogue Ring Mod, based on a high-end integrated circuit
Creates a range of timbres from raw and agressive, to smooth and silky
Individual level controls for both the Carrier (X), and Modulator (Y) inputs
'Mix' knobs that control the balance between dry (carrier) and wet (modulated) material
Discrete modulator features 4 replaceable diodes on the rear to customise its behaviour
Both sides' interfaces have
identical behaviour
www.AvonSynth.com
Description of Functionality
Germanium, or even LEDs to adjust
the timbre of the Discrete Ring Mod
X & Y Level Attenuators
These two controls attenuate the
volume of the corresponding
'X' (Carrier) and 'Y' (Modulator)
inputs individually.
'Mix' Knob
This knob controls the balance
at the unit's output between the
Carrier signal (X In) and the
modulated output (X * Y).
Carrier ('X') Input
The sound to be modulated is input here
Ring Modulated Output
Modulator ('Y') Input
The modulating sound is input here
AVS-RING-1
Dual Ring
Modulator
Replaceable Diodes
Feel free to replace these diodes
with other flavours such as
to taste. Ensure that the diodes'
cathode sides match the thicker
lines shown on the printed
silkscreen beneath them.
Bias Trimmer
Adjust this to reduce bleed
in the Integrated Ring Mod
if necessary
C Null and S Null
Adjust these to reduce bleed
in the Discrete Ring Mod
if necessary
Note: Integrated Ring Mod can
be configured to have minimal
bleed, but Discrete Ring Mod
will naturally contain much more
bleed, even at optimal trimmer positions
Page 2 of 3