AVP On The Road AVP-ND-100 Installationsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Installationsanweisung für Zubehör für Kraftfahrzeuge AVP On The Road AVP-ND-100 herunter. AVP On The Road AVP-ND-100 5 Seiten. Sequential led turn signal light
Seite drucken
Step 4
Pull the rear combination light in the direction of the arrow shown in the figure and pull out the pin
and hook from the body. A trim removal tool is very helpful (optional).
Step 5
Turn the socket counterclockwise and remove it in the direction of arrow (1) shown in the figure and
remove the bulb.
Step 6
Partially insert the LED light by holding the board with two fingers in this position (see below photo).