AVP On The Road AVP-ND-100 설치 지침 - 페이지 4

{카테고리_이름} AVP On The Road AVP-ND-100에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AVP On The Road AVP-ND-100 5 페이지. Sequential led turn signal light

Step 4

Pull the rear combination light in the direction of the arrow shown in the figure and pull out the pin

and hook from the body. A trim removal tool is very helpful (optional).

Step 5

Turn the socket counterclockwise and remove it in the direction of arrow (1) shown in the figure and

remove the bulb.

Step 6

Partially insert the LED light by holding the board with two fingers in this position (see below photo).