AVP On The Road AVP-ND-100 설치 지침 - 페이지 3

{카테고리_이름} AVP On The Road AVP-ND-100에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AVP On The Road AVP-ND-100 5 페이지. Sequential led turn signal light

Remove the screw using a Phillips screw driver, then remove the nut using a 10mm socket wrench.

CAUTION:



When removing the rear combination light from the body, it could interfere with the body

and cause scratching or damage to the body. When removing the rear combination light

from the body, apply protective tape to the body.



Do not use tape that has a strong adhesion strength, otherwise the paint coat may peel off.



To prevent scratches or damage, affix protective tape to the position shown in the figure. .