AVP On The Road AVP-ND-100 Інструкція з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Автомобільні аксесуари AVP On The Road AVP-ND-100. AVP On The Road AVP-ND-100 5 сторінок. Sequential led turn signal light
Друкувати сторінку
Remove the screw using a Phillips screw driver, then remove the nut using a 10mm socket wrench.
CAUTION:
When removing the rear combination light from the body, it could interfere with the body
and cause scratching or damage to the body. When removing the rear combination light
from the body, apply protective tape to the body.
Do not use tape that has a strong adhesion strength, otherwise the paint coat may peel off.
To prevent scratches or damage, affix protective tape to the position shown in the figure. .