DFI EC900-8MM Handbuch zur Schnellinstallation - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Computer Hardware DFI EC900-8MM herunter. DFI EC900-8MM 16 Seiten. Nxp i.mx8m mini processor ruggedized fanless embedded system
Auch für DFI EC900-8MM: Benutzerhandbuch (15 seiten)
Seite druckenInstalling an M.2 Card
Please follow the steps below to install the card into the socket.
M.2 Module
M.2 Socket
M.2 Module
M.2 Socket
Stand-off
M.2 Sockets
Notch
Key
Stand-off
Notch
Key
M.2 Module
M.2 Socket
Step 1:
Insert the card into the socket at an angle while making sure the notch and key
are perfectly aligned.
Stand-off
Notch
Key
M.2 Module
M.2 Socket
Stand-off
Notch
Key
Step 2:
Press the end of the card far from the socket down until against the stand-off.
Step 3:
Screw tight the card onto the stand-off with a screw driver and a stand-off screw
until the gap between the card and the stand-off closes up. The card should be
lying parallel to the board when it's correctly mounted.
Quick Reference | EC900-8MM / EC910-8MM
7