DFI EC900-8MM Handbuch zur Schnellinstallation - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Computer Hardware DFI EC900-8MM herunter. DFI EC900-8MM 16 Seiten. Nxp i.mx8m mini processor ruggedized fanless embedded system
Auch für DFI EC900-8MM: Benutzerhandbuch (15 seiten)

Seite drucken

Installing an Antenna

Before installing the antenna, please make sure that the following safety cautions are

wellattended.

1. Make sure the PC and all other peripheral devices connected to it has been

powered down.

2. Disconnect all power cords and cables.

Step 1:

There are antenna holes reserved on the right side of the system and by default

covered by rubber plugs. Please remove the plug prior to installing an antenna.

Step 2:

Connect the internal cable to the board's antenna connector, screw the antenna

connector through the antenna hole with washers and nuts, and screw on the

antenna as illustrated below.

Antenna

Chassis Wall

Module Connector

Cable

Antenna Connector

Washer

Nut

Quick Reference | EC900-8MM / EC910-8MM