CPS Compute-A-Charge CC220E Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Skalen CPS Compute-A-Charge CC220E herunter. CPS Compute-A-Charge CC220E 8 Seiten. Refrigerant charging scale

Seite drucken
7 BUTTON KEYPAD (FUNCTIONS & DEFINITIONS)
1. POWER KEY
a.Press to turn power ON or OFF.
2. UNITS KEY
your desired weight unit (LB to KG,
or KG to LB).
3. TARE KEY
a. While in WEIGH mode - Press to Tare
("zero out") the scale display.
b. While in HOLD mode - Tare function is
not active.
c. While in CHARGE/RECOVER mode -
Resets programmed amount to 0.
4. GO/HOLD KEY
a. Starts CHARGE or RECOVER modes (per
data entered after pressing the Set key).
b. While running in CHARGE or RECOVER
modes, pressing this key will place the
CC220E into HOLD (pause).

GENERAL SAFETY INSTRUCTIONS

Please read, follow and understand the contents of this entire manual, with special attention
given to Danger, Warning and Caution statements.
FOR USE BY PROFESSIONALLY TRAINED AND CERTIFIED OPERATORS ONLY. MOST STATES,
COUNTRIES, ETC., MAY REQUIRE USER TO BE LICENSED. PLEASE CHECK WITH YOUR
LOCAL GOVERNMENT AGENCY.
DANGER: Overfilling a recovery tank may cause a violent rupture resulting in severe injury
WARNING: All hoses may contain liquid refrigerant under pressure. Contact with refrigerant may
WARNING: Avoid breathing refrigerant vapors and lubricant vapor or mist. Breathing high
WARNING: Make certain all safety devices are functioning properly before operating equipment.
1.800.561.8187
- Press to select
or even death. As a minimum, please use a scale to continuously monitor
recovery tank weight.
cause frostbite or other related injuries. Wear proper personal protective equipment
such as safety goggles and gloves. When disconnecting any hose, please use extreme
caution as high pressure refrigerant may be present.
concentration levels may cause heart arrhythmia, loss of consciousness, or even
cause suffocation. Exposure may irritate eyes, nose, throat and skin. Please
read manufacturer's Material Safety Data Sheet for further safety information on
refrigerants and lubricants.
www.
5. SET/RESET KEY
There are 5 modes to select and/or where
information can be entered: Scale (Weigh),
Charge, Recover, APO, Resolution
a. Press to scroll through different modes
b. Press while in any mode to terminate
and return to SCALE mode.
6. UP KEY
a. Increases the weight displayed (one
resolution unit) for every actuation, or if
continuously pressed.
7. DOWN KEY
a. Decreases the weight displayed (one
resolution unit) for every actuation, or if
continuously pressed. A visual reminder
will flash if the display reaches 0.
.com
3