Dell PowerEdge 1955 Handbuch verwenden - Seite 20
Blättern Sie online oder laden Sie pdf Handbuch verwenden für Server Dell PowerEdge 1955 herunter. Dell PowerEdge 1955 44 Seiten. Using dell blade servers in a dell poweredge high availability cluster
Auch für Dell PowerEdge 1955: Schnellstart-Handbuch (12 seiten)
Seite drucken
Cluster Nodes
Table 1-4 lists the hardware requirements for the server modules in the
PowerEdge server enclosure.
Table 1-4. Cluster Node Requirements
Component
Cluster nodes
RAM
Fibre Channel
mezzanine card
iSCSI mezzanine
card
Gigabit Ethernet
(cluster networks)
RAID controller
(optional)
20
Introduction
Minimum Requirement
Two to eight PowerEdge server modules running the appropriate
Windows Server 2003 operating system edition as described in
Table 1-1
At least 512 MB of RAM installed per server module
If the cluster is configured with a Fibre Channel shared storage
system, at least one dual-port Fibre Channel mezzanine card per
server module
If the cluster is configured with an iSCSI shared storage system,
at least one dual-port Gigabit Ethernet mezzanine card per
server module
At least two Gigabit Ethernet interfaces per server module
One controller connected to two internal hard drives for each
server module in a RAID 1 configuration
NOTE:
It is strongly recommended that you use hardware-based
RAID or software-based disk-fault tolerance for the internal drives.