Dell PowerEdge 1955 매뉴얼 사용 - 페이지 20

{카테고리_이름} Dell PowerEdge 1955에 대한 매뉴얼 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1955 44 페이지. Using dell blade servers in a dell poweredge high availability cluster
Dell PowerEdge 1955에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

Cluster Nodes

Table 1-4 lists the hardware requirements for the server modules in the

PowerEdge server enclosure.

Table 1-4. Cluster Node Requirements

Component

Cluster nodes

RAM

Fibre Channel

mezzanine card

iSCSI mezzanine

card

Gigabit Ethernet

(cluster networks)

RAID controller

(optional)

Introduction

Minimum Requirement

Two to eight PowerEdge server modules running the appropriate

Windows Server 2003 operating system edition as described in

Table 1-1

At least 512 MB of RAM installed per server module

If the cluster is configured with a Fibre Channel shared storage

system, at least one dual-port Fibre Channel mezzanine card per

server module

If the cluster is configured with an iSCSI shared storage system,

at least one dual-port Gigabit Ethernet mezzanine card per

server module

At least two Gigabit Ethernet interfaces per server module

One controller connected to two internal hard drives for each

server module in a RAID 1 configuration

NOTE:

It is strongly recommended that you use hardware-based

RAID or software-based disk-fault tolerance for the internal drives.