Dell PowerEdge 2450 Information Update - Seite 12

Blättern Sie online oder laden Sie pdf Information Update für Server Dell PowerEdge 2450 herunter. Dell PowerEdge 2450 12 Seiten. Wake-on-lan (wol) support on dell servers
Auch für Dell PowerEdge 2450: Installationshandbuch (26 seiten), Handbuch installieren (32 seiten), Installationshandbuch (20 seiten), Ergänzendes Handbuch (30 seiten), Handbuch zur Hardware-Installation (32 seiten), Software-Handbuch (10 seiten), Installationshandbuch (8 seiten), Handbuch (15 seiten)

1-10

Dell PowerEdge 2450 Systems Information Update

heat sink

guide-bracket

assembly

% '!"!#

$ %&

Replace the air blower, if it was removed in step 3 of the previous procedure (see

Figure 1-3).

Position your right thumb on the outside of the power supply enclosure

beside the narrower front part of the air blower.

Push firmly on the power supply enclosure to move it slightly toward the

power supplies, allowing extra clearance to install the air blower.

Hold the air blower above the heat sink while tilting the back of the air blower

slightly down and toward the back of the chassis.

Slide the metal tab at the back right of the air blower carefully into the

topmost slot at the top back of the chassis.

With your left hand, push down firmly on the front of the air blower until you

hear it snap into place.

Make sure that the top of the air blower is level; if it is not level, lift out the air

blower and reinstall it making sure the tab goes into the slot at the very top

of the back chassis.

Plug in the Y -shaped blower power cable to the connector on the interposer

board.

Replace the system cover.

Reconnect your system and peripherals to their power sources.

SEC cartridge

tab