Dell PowerEdge 2450 Information Update - Seite 9

Blättern Sie online oder laden Sie pdf Information Update für Server Dell PowerEdge 2450 herunter. Dell PowerEdge 2450 12 Seiten. Wake-on-lan (wol) support on dell servers
Auch für Dell PowerEdge 2450: Installationshandbuch (26 seiten), Handbuch installieren (32 seiten), Installationshandbuch (20 seiten), Ergänzendes Handbuch (30 seiten), Handbuch zur Hardware-Installation (32 seiten), Software-Handbuch (10 seiten), Installationshandbuch (8 seiten), Handbuch (15 seiten)

Seite drucken
Dell PowerEdge 2450 Information Update
support.dell.com
NOTE: The RCU recognizes microprocessors operating at 450 MHz and faster. The
latest version of the RCU is available at http://support.dell.com.
1.
Turn off the system, including any attached peripherals, and disconnect the
power cable from the electrical outlet.
2.
Open the system cover.
See your system's Installation and Troubleshooting Guide for specific instruc-
tions, if needed.
3.
Remove the air blower, if present (see Figure 1-3).
a.
Unplug the Y -shaped air blower power cable from the interposer board.
b.
Position your right thumb on the outside of the power supply enclosure
beside the narrower front part of the air blower.
c.
Push firmly on the power supply enclosure to move it slightly away from the
air blower and allow extra clearance to remove the air blower.
d.
With your left hand, pull the front of the air blower upward and away from
the power supplies to unseat it. You should hear it unsnap.
By pulling the air blower slightly away from the power supplies, you avoid the
need to use excessive force to clear the power supply enclosure.
e.
Slide the air blower slightly up and toward the front of the chassis until the
metal tab at the back right of the air blower slides out of the small slot at the
top back of the chassis.
Dell PowerEdge 2450 Systems Information Update
1-7