Dell POWEREDGE 4300 Installationsanleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Server Dell POWEREDGE 4300 herunter. Dell POWEREDGE 4300 12 Seiten. System board upgrade
Auch für Dell POWEREDGE 4300: Informationen zur Installation (6 seiten), Installationshandbuch (28 seiten), Rack-Einbau (37 seiten), Upgrade-Installationshandbuch (14 seiten), Rack-Einbau (34 seiten), Upgrade-Handbuch (23 seiten), Upgrade-Handbuch (24 seiten), Ersatz-Handbuch (3 seiten), Informationen zur Installation (6 seiten), Installationshandbuch (14 seiten)

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

If your system supports the GSO-slot bracket, perform steps 4 and 5; otherwise,

go to step 6 for instructions on installing the PCI-slot bracket.

For GSO-slot brackets, locate the GSO slot on the system's back panel (at the

upper right-hand side as viewed from the back) and remove the tab for the slot.

From inside the chassis, orient the SMB connector as shown in Figure 1 (for

6300 systems) or Figure 2 (for 4300 systems) and insert it into the tab opening. On

the back panel, secure the SMB connector with the screws that came in the kit.

NOTE: Be sure not to over-tighten the screws.

SMB connector

(SDS_SMB)

system

board

SMB

connector

! "

GSO slot

SMB cable