Dell POWEREDGE 4300 Panduan Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Server Dell POWEREDGE 4300. Dell POWEREDGE 4300 12 halaman. System board upgrade
Juga untuk Dell POWEREDGE 4300: Informasi Instalasi (6 halaman), Panduan Instalasi (28 halaman), Pemasangan Rak (37 halaman), Panduan Instalasi Upgrade (14 halaman), Pemasangan Rak (34 halaman), Panduan Peningkatan (23 halaman), Panduan Peningkatan (24 halaman), Manual Penggantian (3 halaman), Informasi Instalasi (6 halaman), Panduan Instalasi (14 halaman)

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

If your system supports the GSO-slot bracket, perform steps 4 and 5; otherwise,

go to step 6 for instructions on installing the PCI-slot bracket.

For GSO-slot brackets, locate the GSO slot on the system's back panel (at the

upper right-hand side as viewed from the back) and remove the tab for the slot.

From inside the chassis, orient the SMB connector as shown in Figure 1 (for

6300 systems) or Figure 2 (for 4300 systems) and insert it into the tab opening. On

the back panel, secure the SMB connector with the screws that came in the kit.

NOTE: Be sure not to over-tighten the screws.

SMB connector

(SDS_SMB)

system

board

SMB

connector

! "

GSO slot

SMB cable