Dell PowerEdge M915 Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch für Server Dell PowerEdge M915 herunter. Dell PowerEdge M915 25 Seiten. Dell poweredge blade servers getting started guide
Auch für Dell PowerEdge M915: Anmerkungen zur Veröffentlichung (27 seiten), Benutzerhandbuch (23 seiten), Wichtige Informationen Handbuch (35 seiten), Handbuch "Erste Schritte (12 seiten), Handbuch "Erste Schritte (12 seiten), Benutzerhandbuch (3 seiten), Portfolio-Handbuch (27 seiten), Handbuch "Erste Schritte (14 seiten), Handbuch "Erste Schritte (12 seiten)

Rev 1.00

Description:

Use this command to restart the module components. When this command is issued, PTM compo-

nents go through a full hardware reset, followed by software reload.

Options:

• device_number: specify a single device to reset

Example:

$ reload

3.5

Software Update Commands

Synopsys:

show image ver

Description:

Display the current software image version.

ADMIN: This command also displays the firmware version of each component.

Example:

# login admin

& show image ver

Software image short version: V Z.ZZ

Software image version: X.X.XXX-<date stamp>

Component #1 firmware version: Y.Y.YYY

Component #2 firmware version: Y.Y.YYY

Component #3 firmware version: Y.Y.YYY

& login user

Synopsys:

copy image from-file [device_number]

Description:

Update the firmware the PTM software image. In ADMIN mode, it allows selective upgrade of a

single device in the PTM. Immediately after running this command, the CLI waits for the user to

send the firmware image using the ZModem protocol. To abort this operation, use CTRL-C. For

additional details on the firmware update procedure refer to

on page 22

ADMIN:

Section 4, "Operating Procedures,"

Software User's Manual