Dell EMC PowerStore Schnellstart-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Lagerung Dell EMC PowerStore herunter. Dell EMC PowerStore 8 Seiten.
Auch für Dell EMC PowerStore: Schnellstart-Handbuch (8 seiten)
Seite drucken
4. Record the Dell Service Tag
Locate and record the number from the black Dell Service Tag on the front of the base enclosure.
5. Install optional expansion enclosures
For each additional expansion enclosure, repeat steps 2 and 3 to install the rails and expansion enclosure onto the rails.
If you are not installing an expansion enclosure, continue to step 7.
6. Connect the expansion enclosure to the base enclosure
Before you begin:
Select a single color of cable labels for use on all of the enclosures attached to the base enclosure (3 maximum). Apply cable
labels at each end of the following cables:
-
Node to first expansion enclosure
-
Node to last expansion enclosure
-
Expansion enclosure to expansion enclosure
Cable both embedded modules on the base enclosure to the link control card (LCC) on the new expansion enclosure:
1.
Connect node A, SAS port B to LCC A, port A on the expansion enclosure (1).
2.
Connect node B, SAS port B to LCC B, port A on the expansion enclosure (2).
3.
Connect node B, SAS port A to LCC A, port B on the expansion enclosure (3).
4.
Connect node A, SAS port A to LCC B, port B on the expansion enclosure (4).
If adding a second and third expansion enclosure, daisy chain the enclosures using the diagrams on the cable label sheet.
*Not applicable for PowerStore 500T.
Dell EMC PowerStore Quick Start Guide
4
Expansion
B
enclosure 1
A
1
Node
B
A
Dell Service Tag
*
2
3
*
Page 4 of 8