Dell EMC Unity Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Lagerung Dell EMC Unity herunter. Dell EMC Unity 9 Seiten.

Seite drucken
EMC Unity
Before you begin
Required:
Create an EMC Online Support account:
❑
https://support.emc.com. You will need this
account later in the installation process to
activate software licenses and configure ESRS
(EMC Secure Remote Services).
If your Unity system arrived pre-racked, begin
❑
installation at Step 4 of this guide.
Obtain the help of a second person to install
❑
the enclosure into the rack, or use a mechanical
lift.
If you have more than one enclosure to install,
❑
Unity Installation Guide
use the
your installation. The installation guide
includes racking and cabling instructions
required for additional enclosures, which are
not covered here. The
is located here: http://bit.ly/unityinfohub.
Purpose of this document
Management
™
Quick Start
to complete
Unity Installation Guide
Launch
Unisphere
8
Assign
7
Address
6
Power Up
Recommended:
Download the Connection Utility at
❑
unityinfohub. You will need this utility if you want to
assign static IP addresses to your system. You will not
need this utility if you plan to use DHCP to
automatically assign IP addresses to your system.
If you are installing your system in a location with
❑
restricted internet access, download the Connection
Utility and your license files before starting the
installation process: http://bit.ly/unityinfohub.
Watch the Unity Quick Start Installation video:
❑
bit.ly/unityinfohub.
What's next
Refer to the
section for important details
❑
about adding enclosures and using the Unisphere
online help.
Unpack
1
Install
Rails
2
3
4
Record SN
5
Cable to
Network
Copyright © 2016 EMC. All rights reserved. P/N 300-000-228 Rev 02
http://bit.ly/
http://
Install
System
>