Dell PowerVault DR4100 Handbuch bewährter Praktiken - Seite 38

Blättern Sie online oder laden Sie pdf Handbuch bewährter Praktiken für Lagerung Dell PowerVault DR4100 herunter. Dell PowerVault DR4100 41 Seiten. Backup and recovery appliance
Auch für Dell PowerVault DR4100: Handbuch "Erste Schritte (10 seiten), Handbuch (37 seiten), Freigabemitteilung (16 seiten), Handbuch (12 seiten), Handbuch (24 seiten), Handbuch (23 seiten), Qiuck-Einrichtung (1 seiten), Handbuch (27 seiten), Handbuch (25 seiten)

Seite drucken
Dell PowerVault DR4100 Handbuch bewährter Praktiken
1.
Upgrade the DR appliance to the latest 2.1 firmware.
2.
After the upgrade, two additional 1 GB interfaces will appear. The 10GB interfaces will be bonded as bond0.
Use the following command to view the available network interfaces:
network --show
3.
Break bond0 and release eth0 from bond0 using the following command:
network -- delete --member <eth(0-N)>
network – restart
administrator@DR> network --delete -- member eth0
network --restart
4.
Use the following command to view the released interface eth0:
network --show
5.
Assign an IP address and DNS name to the released interfaces using the following command:
network   -­‐ -­‐create_interface   -­‐ -­‐nwif<   e htN>   -­‐ -­‐static   -­‐ -­‐ip<ip   a ddress>   -­‐ -­‐netmask<netmask>   -­‐ -­‐
name<dns   n ame>   -­‐ -­‐restart  
 
 
administrator@DR> network --create_interface --nwif eth0 --static_ip x.x.x.x --netmask
 
255.255.255.0 --name dr-cifs.local --resta
 
 
 
Note: Bond0 will maintain the default name given to it at time of setup.
6.
Use the following command to verify network settings:
network --show
Note: Take note of the DNS names for bond0 and for the configured 1GB interface. These DNS names are required to
force traffic to the specified interface.
7.
Create two CIFS containers on the DR appliance. One container called cifs-container-1 and the other cifs-
container-2.
38
DR4100 Best Practice Guide | April 2014
Example
Example